Everything posted by ztwoem
ztwoem posted a topic in Təbiət elmləriZTW SEAL Series 300 amp 14s Lipo brushless esc. source from : http://www.ztwshop.com/product/ztw-seal-series-brushless-esc/ Specs: Waterproof design (rates as IP 67) allows this ESC to work in wet conditions. Continuous Current (A): 300 Amps Burst Current(A): 350 Amps Voltage: 18-42 NiH : 6s - 14s Lipo Power Wire: ，160mm-Red/160mm-Black Motor Wire ，160mm-Black BEC output: None requires rx pack. Optional programing with LCD programming card. Case dimensions (not including wires): Length: 150mm Width: 85mm Height: 28.6mm Weight: 640g Includes: Everything in picture number one Requires: Connectors, 8mm bullet connectors or larger.
ZTW Mantis Series BECs are designed for both beginner and advanced modelers. Their performance and stability have been approved by distributors and pilots around the world. Mantis ESCs feature a compact size, light weight, super smooth start up and throttle linearity, multiple protection modes, solid BEC output, and more. All these features make Mantis Series ESCs the perfect mid-level speed controller for park flyer, sport, and aerobatic pilots. ZTW speed controllers are one of the most widely used and trusted speed controller brands available on the market today. They are sold under many different brand names, but we choose to purchase direct from the manufacturer without rebranding so that we can pass the savings on to you. ZTW controllers represent a new generation of brushless ESCs using advanced microprocessor technology. They are designed and manufactured with high quality components which provide exceptional reliability, low internal resistance, and a smooth, linear throttle response. Features: New advanced programming software with secondary sub-menu setting for ease of use. Advanced Governor Mode (uses B-Series design to keep the motor speed even though the load is changed) Supports high RPM motors, can be used with most of the RC motors on the market. More optional motor timing, startup and soft acceleration settings for smoother motor operation. Super smooth and accurate throttle linearity. Power arming protection (prevents the motor from accidentally running when switched ON). Auto throttle shut down in signal loss situation. Safety thermal over-load protection: when the temperature of ESC exceeds 110 deg C, the ESC will reduce the output power to allow it to cool. Uses new generation MOSFET to ensure ESC's low operation temperature while supporting biggest peak currents and higher reliability. Specifications: Output: 6A continuous, 12A burst for 16 seconds Input voltage: 2-4s LiPo; 5-12 cell Ni-XX BEC output: 5V/1A (linear) Weight: 10g Dimensions: 23 x 22 x 7mm Programmable Options: Brake setting (off/soft/mid/hard -- default: off) Battery type: (Ni-XX/LiPo/LiFe -- default: LiPo auto detect) Low voltage cutoff setting (2.8V / 3.0V / 3.2V / None -- default: 3.0V) Factory default setup reset Timing settings (auto / 2° / 5° / 8° /15° / 22° /30° -- default: auto) SBEC output voltage (on 45A and larger models only) (5.0V / 5.5V / 6.0V -- default: 5.0V) Governor mode (RPM off / 1st soft start / 2nd soft start / gov mod 1 / gov mod 2 -- default: RPM off) Motor rotation (forward / reverse -- default: forward) Start-up strength (10% / 15% / 20% / 25% / 30% / 35% / 40% / 45% / 50% -- default: 30%) Low voltage cutoff type: )reduce power / cut-off power -- default: reduce) Parameters can be programmed using your transmitter, or by using the optional programming card sold separately. more info: http://www.ztwshop.com
ztwoem posted a topic in Din və fəlsəfəThis is a high voltage version Gecko ESC supports up to 12S LiPo, but no built in BEC. GECKO series also include ESC OPTO for giant flying. This series of ESCs also features an exposed, finned heat sink aluminum case with lightweight plastic end caps. Additional features include safe power arming along with advanced programmable, data logging system, low voltage cutoff, braking, timing, throttle input range, and more, making this series truly a pro series speed control. As the development of the electronic and popular demand and designed for extreme aerobatics and therefore has the capability to support the higher current applications to eliminate the possibility of unwanted shutdowns, and is also capable of supporting continuous simultaneous multiple servo operations typically found in CCPM equipped hardcore 3D E-helicopters. Features Data logging system such as temperature, voltage, current, RPM, SBEC Voltage Output 5.0, 6.0, 7.4, 8.4V adjustable Advanced Governor Mode and soft start High SBEC Current Output, continuous 8A and burst 16A, designed to meet your high current application Power arm protection, over-heat protection, low-voltage protection and lost-signal protection Secondary sub-menu setting by LCD program card or PC interface Firmware updating by PC interface Unique metal shape designing gives your new fashion visual impact. Super smooth and accurate throttle linearity Support and match with most of the motors, including high RPM motors Programmable motor timing Utilizes new smaller MOSFET technology to minimize weight Finned heat sink programmable throttle input range Anti-spark circuit eliminates (HV OPTO version only) Specifications Output: Continuous Current 120A ,Burst Current 150A for 10 seconds Battery : 18-38 NiXX / 6-12S LiPo Weight: 115g Size: 46x65x16.6mm (WxLxH) more info: http://www.ztwshop.com